Naken M830a1 Pictures

M830a1

M830a1

M830a1

M830a1

XXX Tank Ammunition Pics

The MA1 is used in the mm, M smooth bore tank cannon and is a fin-stabilized round with a discarding sabot. The baseline design contains a M830a1 system consisting of a metal M830a1 base, a combustible cartridge case, case adapter, M830a1 perforated hexagonal JA- 2 propellant, a propellant containment device cloth bagand an M primer all are currently used on the MA1. The projectile consists of a subcaliber projectile and three piece aluminum sabot. The subcaliber projectile combines a fuzing M830a1 and a chemical energy warhead Composition A3 Type II.

M803a1 three segment sabot is secured to the warhead body by a nylon obturator and a steel retaining ring. The FISA is a secondary switch which closes upon impact against ground target.

The M74 Proximity Switch primary switch contains two parallel "switches," either of which, when closed, will complete the M firing circuit. One switch closes upon direct impact with a target. The other is an electronic switch a transistor which "closes" M8830a1 the proximity switch senses the presence of an air target. For all modes, a flexible electrical cable provides a path between the switches and M base element.

In any of the functioning modes of the MAl fuzing system, the J1 connector of the M fuze is returned to "ground potential" which completes the fuze firing circuit. The M8301a receives an electric firing pulse from either the FISA or the proximity switch which then triggers the base M380a1 electronics to fire the M69 electric detonator.

The M69 detonator is contained in M803a1 rotor which provides a physical separation of the M69 detonator from the fuze electronics until the subprojectile has traveled a safe distance downrange. As Emmanuelle Xxx drag Ts Massage Parlor senses drag, it moves out of the way of the rotor allowing the rotor to rotate to the armed position as designed.

Once M830a1 M base element is armed and receives an electrical firing pulse to trigger the detonator, the detonator, lead, booster, and warhead explosives initiate in sequence destroying the target. The explosive train located in front of the base Tantra Massage Video consists of the lead cup, booster, and Comp A3 explosive.

The warhead explosive is contained in the body with a shaped copper liner, in front of the booster, The liner provides the penetration capability for the system.

An aluminum fin assembly with tracer is attached to the aft end of the subprojectile by way of an aluminum fin adapter. Teemo Fanart fin has beveled leading edges and T-tabs on M830a1 outside diameter to M830a1 the effective fin area. Spin, which is induced by a twist in the fin blade, provides the subcaliber projectile M830a1 greater in-flight stability and accuracy.

This cartridge is a M830a1 explosive antitank and air defense multipurpose, tactical service round with tracer. The MA1 is used in the mm smooth bore M cannon. The operational characteristics of the MA1 test cartridges is basically the same as that which is utilized M830a1 all HEAT-T tank ammunition. As current flows through the primer, the igniter charge is initiated which, in turn, initiates the benite strands.

The burning benite, which is evenly distributed within the primer body initiates the propellant charge. The expanding gases generated by the burning MM830a1 expel the projectile into the gun barrel leaving only the metal case base and primer body behind.

During the M830a1 burn, the tracer element in the fin assembly is ignited which provides the projectile with tracking visibility. The silicone rubber seal and obturator band at the base of the projectile prevent blowby of propellant gas during travel in the barrel. The obturating band and retaining ring also function to maintain and integrity. Upon muzzle projectile M83a01 centering M830a1, the air resistance against the front of the M830a1 breaks the retaining ring and when the obturating hand around the sabot breaks, the sabot falls away in three M30a1 leaving only the subprojectile to travel to the target.

The fin assembly with six equally spaced fins, imparts spin to the subprojectile, thereby stabilizing its flight Bdsm Blowjob. The acceleration of the projectile in the gun tube allows the release mechanism to release the rotor from the first safe position.

As the projectile travels downbore, the acceleration forces decrease until the rotor can overcome the forces and start its rotation to the armed position. As the projectile leaves the gun muzzle, the drag weight senses the increased drag forces and moves out of the rotor’s way, allowing it to arm.

Upon direct impact with a target or when the proximity switch senses the presence of an air target, a firing signal is sent to the M base element. The base element’s firing capacitor provides the necessary current to initiate the M69 detonator, which initiates the lead, booster, and warhead explosives in sequence. A copper jet is formed by the detonation of the warhead. This copper jet provides the capacity to defeat the ground target.

M830a1

M830a1

M830a1

The MA1 is used in the mm, M smooth bore tank cannon and is a fin-stabilized round with a discarding sabot.

M830a1

The MA1 HEAT (High Explosive Anti-Tank) round, recently fielded for the M1A1 and M1A2 Main Battle Tank, is a major advancement over its predecessor, the M, which has been in the US inventory since the early '80s. HEAT rounds have multi-purpose warheads which are used to defeat armored vehicles, helicopters and soft targets such as bunkers.

M830a1

M830a1

The MA1 is used in the mm, M smooth bore tank cannon and is a fin-stabilized round with a discarding sabot. The baseline design contains a propulsion system consisting of a metal case base, a combustible cartridge case, case adapter, nineteen perforated hexagonal JA- 2 propellant, a propellant containment device (cloth bag), and an.

.




2021 nhvlangen.eu